Wholesale Price IR Thermal Camera - SR-19 infrared thermal imaging module – Dianyang

Introduction

Shenzhen Dianyang Ethernet SR series infrared thermal camera is a small-size radiometric infrared thermal imager. The product adopts imported detectors, with stable operation and excellent performance. It is equipped with unique temperature calibration algorithm and easy-to-use user interface. It is small in size, light in weight and rich in interface. It is suitable for quality control, heat source monitoring, security night vision, equipment maintenance etc.

SR Series Ethernet infrared thermal cameras are equipped with feature-rich client software and an easy-to-use SDK package that can be used to meet differentiated application needs, whether used alone or in a secondary development.

Benefits

SR series Ethernet infrared thermal cameras include power input, Ethernet, GPIO, serial port and other electrical interfaces to meet different industrial application requirements.

DC12V wide voltage, allowing input power of 9~15V, ripple less than 200mV DC power supply, internal overvoltage and reverse connection protection, input voltage is too high will cause the protection circuit to fail.

RS232-TTL supports 3.3V level standard UART communication standard, which can be connected to PTZ, PC, GPS module, etc.

Control 12V motorized lens

Support IO input trigger

Support RTSP, universal playback software can directly play the video

Support mainstream brand NVR supplier recording storage.

With professional analysis software and SDK development kit to meet the requirements of secondary development and independent use.

Clear image, high temperature measurement accuracy, support -20 ° C ~ 350 ° C

Specification

The specification of SR Series Ethernet is listed below,

Camera lens specification (SR-19-384 product as the example),

Analysis Software

The analysis software can analysis the temperature of infrared videos and images, to connect the infrared thermal camera below.

To connect infrared thermal camera with PC through Ethernet cable or switch, the IP address is “192.168.1.x”, x is not the same as the camera, and the subnet is “255.255.255.0”

Open the analysis software, to scan the camera in the left side, then connect the camera.

SR series infrared thermal camera also support RTSP software and equipment to view the videos to measure the temperature, it supports NVR equipment such as Hikivision and Dahua etc. mainstream brand.

SR series infrared thermal camera also can be viewed by VLC media player, open “tools – preferences – show settings – all” please refer to the below figure to configure,

VLC – Media – Open Network Stream, input below stream address,

rtsp://192.168.1.201/h264，192.168.1.xxx is the camera IP address, press play to open stream.

Dimension

Package List

The package list is below,

Remark,

1. The radiometric type camera is configured as an athermalizing lens

2. The temperature range is -20 °C ~ 350 °C, if requires a higher temperature range will be customized.

3. The backplane interface includes below, if require other interface will be customized,

one RJ45

one alarm in and one alarm out IO

one power interface

one serial port