Well-designed Temperature Scanner Camera - Infrared Thermal Camera Analyzers CA Pro Series – Dianyang

Overview

• CA Pro Series Integrated Thermal Analyzer is able to detect and measure the data of an object’s temperature changing with time based on the principle of infrared detection and imaging, and store and analyze the reliability of the measurement results without time limit.

• It is mainly applied in the location, detection and maintenance of PCBA leakage, short circuit and open circuit; the evaluation and comparison of mobile phones or other smart devices; auxiliary analysis of electronic equipment performance; temperature control of electronic atomizer; temperature conduction analysis of heat conducting and radiating materials; uniformity analysis of materials; heating experiment, thermal simulation and verification of heating rationality in circuit design; and thermal design data analysis, etc.

Application

Detection of short circuit and electric leakage of the PCBA

Analysis of the heat dissipation rationality of the PCBA

Evaluation of the thermal conductivity and heat dissipation of materials

Analysis of temperature control of the atomizer heating of electronic cigarettes

Analysis of thermal effect of components

Analysis of heating rate of heating materials

Other analytical applications: Analysis of LED guide plates, quality analysis of optical fiber welding, loading analysis of components…

♦ specification

Analysis mode

Circuit board analysis mode

Analysis mode of E-cigarette atomizer

Multi-dimensional analysis mode

Analysis mode of material thermal capacity

Defect analysis mode

Application Scenario

Detection and analysis of heat conduction material

        When the heat conduction material conducts heat, different color blocks can be set to view the distribution of heat conduction.

Analysis of the thermal design of the circuit board

        When the circuit board chip heats up, users can check the components affected by the heat to adjust the layout.

Temperature control analysis of E-cigarette

        Quickly tracking the heating rate and temperature of the atomizer

Thermal quality analysis of products and components

        The aging degree of the tested components can be analyzed through the simultaneous comparison of the standard samples and the tested samples.

Material heat dissipation analysis

        The heat dissipation of different heat dissipation materials can be analyzed through the temperature color block.

Circuit board pulse heating analysis

        The thermal analyzer can quickly capture the occasional pulse heat emitted by some components on the circuit board due to failure.

Heating capacity analysis of heating materials at different voltages and currents

        The heating rate, heating efficiency and heating temperature of materials such as heating wire and heating sheet at different voltages and currents can be quantitatively analyzed.

Analysis of the corresponding relationship between voltage, current and temperature

Location detection of short circuit and leakage

        When repairing the circuit board, the leakage position can be located through the first, second and third high temperature points.

Various accessories available

Fixed plate of atomizer test

        Fixed atomizer resistance wire E-liquid injection test. Low resistance connector.

Automatic heating test bench for atomized electronic cigarettes

        Automatic inhalation stimulation. Supporting the setting of pumping experiment times.

Experiment box

        Simulating the temperature conditions of the equipment in a closed environment. Infrared thermal observation window with the diameter of 4cm. Built-in temperature sensor.

Power analyzer

        Load voltage and current power analyzer, which can be connected to the analyzers from the specified manufacturers  as required by customers.

Standard normal temperature reference

        50℃ temperature reference for calibrating the accuracy of equipment temperature at normal temperature